ZMODO NVR - NVR IP Camera Management; IPC Management Interface

15
2.8 IPC Management
[IPC Management]: From the [Main Menu], select [IPC Manage] to manage the connection between the
IP Cameras and the NVR.
1) If [Search and Add All Devices Automatically] is highlighted in yellow, then the NVR will automatically find
cameras on the network and bind them to the list.
2) From [Search IPC], the NVR will search the network for any IP Cameras, and you will be able to select and
bind them to the device.
3) From [Add Device Manually], you can manually select the IP address of a camera and it’s Media Port.
Note, this is a more advanced configuration. Most of the time, lines 1 and 2 will be sufficient in configuring
your NVR.