[HDD Full]: This is what the system will automatically do when the hard drive becomes full.
[Video Standard]: The video standard of the NVR. Default for North America is NTSC
[Pack Duration]: The length of time each video file will be
[Startup Guide]: whether or not to display the startup guide when the system boots
[Sync IPC Time]: Whether or not to sync the date and time on the NVR with the cameras connected to the
system.
2) Network
[Network] In order to set the network parameters on the NVR, click [Network] from the [Settings] menu.
[DDNS]: Allows you to configure the NVR to sync with a DDNS provider
[E-Mail]: Allows you to configure the email settings on the NVR. This is the e-mail used for the alarm settings
when you check “E-Mail”
[UPnP]: Whether or not to enable UPnP and what ports the NVR uses when UPnP is enabled
[FTP]: Allows you to configure an FTP server to be linked with the NVR. This is used when the alarm settings
have “Upload” checked. The NVR will not record to the FTP server, it will only store still images on it.
[Web Port]: This is the port the web browser accesses the NVR on.
[Video Port]: This is the port that the video feed is transmitted over.
[Phone Port]: This is the port that is used when you try to hook a smart phone up to the NVR.
To Next Page
Loading...
Need help?
General