6) Hard Drive Management 
 
[HDD Info]  In order to view the current status of the HDD and to format the HDD, you will need to first go to 
[Main Menu], then to[ Info], and then to [HDD Info]. 
 
 
 
 
[Total Space]: This is the total space available on the hard drive in the NVR. 
 
[Free Space]: This is the amount of free space left on the hard drive in the NVR.   
 
[Status]:  This is the current status of the hard drive in the NVR 
 
[Refresh]: This button will refresh the information shown on the page. 
 
[Format]: This button will format the HDD