3) Press the (+) icon to add a new accessory. Press the button on the larger
piece of your door / window sensor when prompted, and follow the instructions
for naming your sensor.
4) Find a suitable location for your door / window sensor. Find a location close
to your Pivot, within the Pivot’s field of view for optimal performance.
5) Install the door / window sensor. Place one piece of the door or window
sensor on the frame of the door or window, and place the corresponding piece
on the movable part of the door or window. IMPORTANT: When closed, the
distance between the two sensors should be no greater than 2cm.
6) Repeat for other accessories. You will receive alerts when your door or
window is opened under your Pivot’s alerts page.
To Next Page
Loading...
