Note: After initial installation, your Pivot may not rotate or send motion detection alerts because
you’ve been in the room the entire time. To trigger a new or significant motion event, try leaving
the room for at least 10 minutes, then enter the room and move for at least 40 seconds.
Door & Window Sensors
Pivot is a hub for connecting and controlling other Zmodo smart accessories. It
includes two door and window sensors that can be connected to your Pivot.
When a door or window is opened, Pivot can automatically turn to see what
happened. Set up the included sensors by removing the plastic tab and
configuring the sensors in the Pivot settings menu. When Pivot detects an
opened window or door, it will rotate to a preset location set in the “Preset
Setting” menu.
Zmodo App
View and control your Pivot through the free Zmodo app. Sign up for a free
account to:
• View live video and rotate the Pivot
• Review alerts and recorded footage
• View temperature and humidity readings
• Set schedules to determine when the camera is on or off
• Set schedules to determine when you receive notifications
• Share your Pivot with family and set specific permissions
• Share and post moments for your friends to see
Setup
Minimum Requirements
• 2.4GHz WPA/WPA2 password-protected WiFi network
o If you have a dual-band router, make sure that the 2.4GHz and
5GHz signals are broadcasting on a different SSID.
o You will need to make sure that you have a strong WiFi signal
where you want to install your Pivot.
• (mobile viewing & setup) iPhone
®
, iPad
®
, or iPod touch
®
(v.7.0 or newer)
or Android
TM
(v.4.0 or newer) mobile device for the Zmodo mobile app.
To Next Page
Loading...
