Battery pack add-on (coming soon)
Dimensions
75mm diameter, 135mm height
Placing your Pivot
Before setup, you’ll want to find a suitable location to use your Pivot. In order to
make the most of your Pivot’s 360
o
motion detection and surveillance features,
we recommend that you place your Pivot on a flat surface in the middle of your
room, or in a location where most of your room is visible, including doors and
entryways. Follow the tips below to find the ideal location for your Pivot:
1) Check your WiFi signal strength. In order to make sure that your Pivot’s
connection is as stable as possible, make sure that the WiFi signal is very
strong at the location of your Pivot.
2) Check for nearby power outlets. The Pivot was designed to be simple to
install. No mounting or drilling is required, just place the Pivot on a flat surface
near a wall outlet and you’re done.
3) Make sure your Pivot is high enough. Make sure your Pivot is high enough to
capture the entire room. Do not place your Pivot on the floor.
4) Place your Pivot in view of your doors, windows, and other entryways. Your
Pivot will be able to turn towards your doors, windows, and other entryways
when they’re opened. Make sure that your doors and entryways are in the line of
sight of your Pivot.
5) Place your Pivot near the center of the room. You can place your Pivot on a
coffee table, kitchen bar, side table, etc.
Setting up your Pivot
Follow the instructions below to help configure your Pivot for initial use. For
updated instructions and troubleshooting guides, please visit
www.zmodo.com/support.
To Next Page
Loading...
