Configuring a Preset for your door / window sensor:
1) Enter the “Preset Setting” option under the Pivot’s settings menu. Access the
Pivot’s device settings by tapping the settings gear on the Pivot Device Tile, and
select “Preset Setting”.
2) Press the (+) to add a new preset.
3) Name the preset. For example: “Front door was opened.” Or “Window was
opened.”
4) Select the accessory to configure. Select which accessory you would like to
pair with this preset.
5) Use the live video feed to rotate your Pivot to the desired preset location.
Rotate your Pivot toward the door or window, using the live video preview as a
guide.
6) Press “Save” once you’re finished. Repeat these instructions for any other
accessory.
Viewing Temperature and Humidity
Pivot will automatically record temperature and humidity readings. In order to
access detailed readings, tap on the temperature and humidity readings from
your Pivot’s Device Tile.
To Next Page
Loading...
