3) Scan for available Bluetooth devices using your smartphone or music player.
You should see “Pivot” on the list of available Bluetooth devices. Select it.
4) You will hear “Connected” when it is successfully configured. Once
configured, Pivot will play audio from your smartphone or music player.
Configuring window / door sensors
Pivot is a hub for connecting and controlling other Zmodo smart accessories. It
includes two door and window sensors that can be connected to your Pivot.
When a door or window is opened, Pivot can automatically turn to see what
happened. When Pivot detects an opened window or door, it will rotate to a
preset location set in the “Preset Setting” menu. Pivot can support up to 32
smart accessories. Follow the instructions below to set up your door or window
sensors, and repeat for each sensor.
IMPORTANT: When configuring your sensors, your smartphone will need to be
connected to the same WiFi network as your Pivot.
Configuring your door / window sensor:
1) Remove the plastic tab from your door / window sensor. The plastic tab will
activate the battery for your sensor.
2) Enter the “Accessories” option under the Pivot’s settings menu. Access the
Pivot’s device settings by tapping the settings gear on the Pivot Device Tile, and
select “Accessories”.
To Next Page
Loading...
