Zodiac Edenpac 5 User Manual (English)

Other manuals for Zodiac Edenpac 5

Questions and Answers:

H
Hannah MartinAug 17, 2025
What causes high or low pressure fault in the refrigerating circuit of a Zodiac Heat Pump?
- D
  Diana ParksAug 17, 2025
  A high or low pressure fault in the refrigerating circuit of your Zodiac Heat Pump can occur due to: * A mixture of water and air passing through the appliance. In this case, purge the hydraulic circuit. * Refrigerant overload. Consult a ZPCE-approved technician to check the refrigerant level. * Insufficient refrigerant. Consult a ZPCE-approved technician to look for leaks and refill refrigerant.
C
castromichaelAug 19, 2025
What causes a high pressure fault in the refrigerating circuit of a Zodiac Heat Pump?
- M
  Mark TravisAug 19, 2025
  A high-pressure fault in the refrigerating circuit of your Zodiac Heat Pump may be due to: * Water and air mixture passing through the appliance. To resolve this, purge the hydraulic circuit. * Refrigerant overload. Consult a ZPCE-approved technician to check the refrigerant level.
A
Amy DoyleAug 22, 2025
What causes a low pressure fault in the refrigerating circuit of a Zodiac Edenpac 5 Heat Pump?
- E
  Erin GloverAug 22, 2025
  A low pressure fault in the refrigerating circuit of your Zodiac Heat Pump is caused by insufficient refrigerant. To resolve this, consult a ZPCE-approved technician to look for leaks and refill refrigerant.
S
Samantha MeyerAug 26, 2025
What causes a voltage error on my Zodiac Edenpac 5?
- P
  phillipsnancyAug 26, 2025
  A voltage error on your Zodiac Heat Pump indicates insufficient network power. Check the main power line and consult with the electrical network supplier.
A
Allen GarciaAug 28, 2025
What causes a phase order fault on a Zodiac three-phase heat pump?
- M
  martinezreneeAug 28, 2025
  A phase order fault on your Zodiac three-phase heat pump can happen if: * There's incorrect wiring at the unit supply terminals. Check the wiring. * The electrical supplier modified the phase order. Contact your local electricity supplier. * There's a temporary failure of one or several phases.
D
David ThomasAug 30, 2025
Why does the anti-frost safety trigger on my Zodiac Edenpac 5 Heat Pump?
- K
  Kathryn RussoAug 30, 2025
  The anti-frost safety on your Zodiac Heat Pump may trigger if the outside temperature is too low (below +5°C). Wait for a natural rise in the outside temperature.
J
Justin PetersSep 2, 2025
What does a control sensor fault mean on my Zodiac Edenpac 5 Heat Pump?
- N
  nelsongarySep 2, 2025
  A control sensor fault in your Zodiac Heat Pump means the sensor is either defective or disconnected. Replace or reconnect the sensor.
S
Shane LiSep 4, 2025
What does an anti-frost sensor fault mean on my Zodiac Heat Pump?
- A
  Alexandra HughesSep 5, 2025
  An anti-frost sensor fault on your Zodiac Heat Pump means the sensor is either defective or disconnected. To fix this, replace or reconnect the sensor.
B
Brooke MillerSep 7, 2025
What does a defrost sensor fault mean on my Zodiac Edenpac 5?
- L
  Lynn WilliamsSep 7, 2025
  A defrost sensor fault on your Zodiac Heat Pump indicates that the sensor is either defective or disconnected. Replace or reconnect the sensor.
J
Jennifer AllenSep 10, 2025
Why is the anti-frost protection heater on my Zodiac Edenpac 5 activated?
- G
  Gregory GuerraSep 12, 2025
  The anti-frost protection heater on your Zodiac Heat Pump activates when the outside temperature is too low (below +3°C) and the compressor is OFF. Wait for a natural rise in the outside temperature.