EasyManuals Logo

Zodiac G2 Installation Instructions

Zodiac G2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
During the season you can leave your appliance in the water (but
make sure you never leave the hose in full sun; leave it in the water
or in a cool shady place).
Don’t wait until your pool is very dirty and full of algae before using
the G2 : you run the risk of very quickly clogging your
filtration system.
Don’t let large pieces of debris fall to the bottom of your pool, they
may block the diaphragm of the appliance.
Dont allow objects in the pool that may obstruct the appliance.
NOTA : Do not use your G2 pool cleaner if your pool is full of silt.
of this should be the case, then please use a manual brush.
Enquire with your dealer.
Recommendations
This appliance requires very little maintenance:
After use, make sure that nothing is blocking the diaphragm,
Make sure that the hoses are not blocked.
IMPORTANT : During the season, we recommend you leave
your G2 in the pool. If you wish to remove it while bathing,
take off the hose but do not roll it up.
Never expose the hose to sunlight.
Maintenance, storage
Clean the whole appliance and the hoses in clean water.
Leave to dry and store in a dry, frost-free place.
Winter storage

Other manuals for Zodiac G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zodiac G2 and is the answer not in the manual?

Zodiac G2 Specifications

General IconGeneral
Pool TypeIn-ground
Debris TypeSmall to medium
Warranty1 year
Power SourceFiltration System
Cleaning CoverageFloor and walls
Pool SizeUp to 40 feet

Related product manuals