Why Zodiac MX6 does not climb the pool walls?
If your Zodiac Swimming Pool Vacuum isn't climbing the pool walls, check the flow and increase it if necessary. Also, check that the hose float is positioned correctly on the leader hose. Ensure the pool walls are free of algae and are not slippery.
General| Pool Type | In-ground |
|---|---|
| Cyclonic Suction | Yes |
| Flow Regulator Valve | Yes |
| Power Source | Pool's filtration system |
| Warranty | 1 year |
| Cleaning Coverage | Floor and walls |
| Pool Surface | Concrete, tile, vinyl, and fiberglass |
| Type | Suction-side pool cleaner |
Steps to prepare the pool and cleaner before installation.
Details on the AD Flow valve and its installation methods.
Instructions for connecting the pool cleaner's hose sections.
Procedure for attaching the cleaner head to the regulator valve.
Steps for reconnecting the cleaner to the pool's skimmer box.
Guidance on checking and measuring the cleaner's water flow rate.
How to adjust the AD Flow valve settings for optimal performance.
Proper procedure for disconnecting and removing the cleaner from the pool.
Instructions on how to backwash the pool filter while the cleaner is connected.
Recommendations for removing the cleaner before adding pool chemicals.
Step-by-step guide to accessing and clearing debris from the cleaner's engine.
Instructions for removing the inlet throat adaptor on the MX8 model.
Details of the Zodiac Australia express warranty for the MX6/MX8 cleaner.
Information on how to register the product for warranty purposes.
Steps and contact information for submitting a warranty claim.
Information on consumer guarantees and rights under Australian law.
Notes on warranty rights for customers outside Australia.
Clarification on how warranty statements in manuals are superseded.
To Next Page
