Need help?Do you have a question about the Zodiac Team Pro + and is the answer not in the manual?
Controls power and volume.
Transmit and receive button.
Disables squelch for monitoring.
Locks front keys to prevent accidental operation.
Captures voice input for transmission.
Shows radio status and information.
Navigates through menu options.
Port for connecting external devices.
Indicates received signal strength.
Displays transmission power (High/Low).
Shows the remaining battery charge.
Visual indicator for the key lock function.
Shows when the VOX function is active.
Indicates active channel scanning.
Displays when the monitor function is active.
Symbol for CTCSS tone activation.
Indicates when whisper mode is enabled.
Selects microphone gain (Normal/Whisper).
Navigate channels or menu options.
Used to enter and confirm menu selections.
Initiates channel scanning.
Adjusts the squelch level.
How to lock/unlock keys to prevent accidental use.
Sets squelch threshold to filter noise.
Identifies pairing key and status indicator.
Steps for connecting and pairing a Bluetooth headset.
Instructions for fully charging the radio battery.
Steps to securely connect the battery to the radio.
Procedure for safely detaching the battery.
Instructions for connecting the antenna to the radio.
Procedure for powering the radio on and off.
How to control the audio output level.
Steps to choose a communication channel.
How to send audio signals using the PTT switch.
How the radio indicates incoming signals and CTCSS use.
Explains battery level display and warnings.
Details on using the automatic rapid charger.
Advice on antenna selection for different terrains.
Options for external audio accessories.
Information on using ear protectors with the radio.
Explanation of Continuous Tone Code Squelch System.
Describes the monitor function for weak signals.
Explains squelch for noise filtering and sensitivity.
Definition of Voice Operated Control for transmission.
Key parameters like channels, range, battery, size.
Details on sensitivity, rejection, and intermodulation.
Output power, modulation, and signal quality metrics.
To Next Page
General
