16
2.9 I Good pracces aer each cleaning operaon
2.9.1 Clean the lter as soon as the appliance is out of the pool
• The cleaner's performance may be reduced if the lter is full or dirty.
• Clean the lter in clean water as soon as the appliance is removed form the pool aer each
cleaning cycle. Do not wait for the debris to dry.
• Aer each cleaning cycle, follow the steps for cleaning the lter, voir § « 3.2 I Clean the lter as soon as the appliance
is out of the pool ».
2.9.2 Lay out the cable to reduce tangling
The appliance's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled will
guarantee beer coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
2.9.3 Storing the cleaner and cable
• Screw the protecve cap back on if you unplug the control box power cord.
• Place the cleaner vercally at the locaon provided on the caddy for it to dry out quickly. Roll up the cable carefully
and place it on the caddy handle (see image ).
• Store all elements away from direct sunlight, humidity, and the elements, as well as any splashes. A protecve cover
is available as an opon (see image ).
EN
To Next Page
Loading...
Need help?
General
