Zodiac Vortex RV5380 - Electrical Appliance Safety; Pool Cleaner Usage Guidelines; Vinyl Surface Precautions

3
WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES
• The power supply to the appliance must be protected by a dedicated 30 mA
residual current device, complying with the standards and regulaons in force in
the country in which it is installed.
• Do not use any extension lead when connecng the appliance; connect the
appliance directly to a suitable power supply.
• Before carrying out any operaons, check that:
- The required input voltage indicated on the appliance informaon plate corresponds
to the mains voltage;
- The mains supply is compable with the appliance's electricity needs and is correctly
grounded;
- The plug (where applicable) is compable with the socket.
• In the event of abnormal operaon or the release of odours from the appliance,
turn it o immediately, unplug it from its power supply and contact a professional.
• Before servicing or performing maintenance on the appliance, check that it is
powered o and completely disconnected from the power supply.
• Do not disconnect and reconnect the appliance to the power supply when in
operaon.
• Do not pull on the power cord to disconnect it from the power supply.
• If the power cord is damaged, it must be replaced by the manufacturer, an
authorised representave or a repair facility only.
• Do not perform maintenance or servicing operaons on the appliance with wet
hands or if the appliance is wet.
• Before connecng the appliance to the power supply, check that the connecon
unit or socket to which the appliance will be connected is in good condion and
shows no signs of damage or rust.
• For any component or sub-assembly containing a baery: do not recharge or
dismantle the baery, or throw it into a re. Do not expose it to high temperatures
or direct sunlight.
• In stormy weather, disconnect the appliance from the power supply to prevent it
from suering lightning damage.
• Do not immerse the appliance in water (with the excepon of cleaners) or mud.
SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"
• The cleaner is designed to operate properly in pool water at a temperature of
between 15°C and 35°C.
• To avoid possible injury or damage to the cleaner, do not operate the cleaner out
of the water.
• In order to prevent possible injury, bathing is prohibited when your cleaner is in
the pool.
• Do not use the cleaner during shock chlorinaon.
• Do not leave the cleaner unaended for an extended period.
WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE:
• Before installing your new cleaner, carefully inspect the lining of your pool. If the
liner has eroded in some areas, or if you noce gravel, folds, roots or corrosion
caused by metal beneath the liner, or if you noce that the surface (boom and
walls) is damaged, do not install the cleaner before performing the necessary repairs
or before having the liner replaced by a qualied professional. The manufacturer
may not be held liable in any way for damage caused to the liner.
• The surface of certain vinyl paerned surfaces can wear rapidly and the paerns
disappear on contact from objects such as cleaning brushes, toys, inatable buoys,
chlorine distributors and automac pool cleaners. The decoraon on some vinyl
surfaces can be scratched or worn by basic fricon such as through the use of a
pool brush. The colours of certain paerns can also be erased during use or when
in contact with objects in the pool. The manufacturer of the pool cleaner may not
be held liable for the erased paerns, wear or scratching of vinyl surfaces, which
are not covered by the limited warranty.