Zodiac VX65 iQ Vortex-Pro - Attach Control Unit to Caddy

Attach the Control Unit to the Caddy
1. Align the bottom of the control unit with the notch at bottom of the control unit
hook on the caddy (Figure 8).
Figure 8. Align Control Unit with Caddy Hook
2. Press control unit onto the caddy hook until it snaps and locks into position
(Figure 9).
Figure 9. Attach the Control Unit onto Caddy
Page 10
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual