1
Figure 12. Submerge the Cleaner Vertically
3. Ensure the unit sinks to the bottom of the pool and does not oat
(Figure 13).
2
Figure 13. Cleaner Sinking to the Bottom of the
Pool
4. Place only enough oating cable in the water to reach the farthest end of your
pool from the central point. Spread out the oating cable ensuring there are no
kinks or coils in the cable (Figure 14).
Page 14
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual
To Next Page
Loading...
