EasyManua.ls Logo

Zodiac VX65 iQ Vortex-Pro - Page 35

Zodiac VX65 iQ Vortex-Pro
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to connect:
You must connect to the home router (network) by rst establishing a direct connection
between the control box and your smart device. (See: Conguring the System.)
IMPORTANT: It is recommended to locate the control box as close to the home router as
practical. Do not use an extension cord.
Common iAquaLink
Troubleshooting
Remember, if you get a new Wi-Fi Router, reset the defaults of your current Wi-Fi
Router or simply change your Wi-Fi network password, you will have to re-establish the
connection between your cleaner and the router. (See: Congure the System.)
User Issue Possible Cause Suggested Solution
All lights are off Bright sunlight Shield the lights to block sunlight and re-check if
the lights are lit.
Control box is unplugged. Plug the control box into a power outlet. (See:
Connect to a Power Source).
Power outage. Verify that the breaker is on and electricity is
being supplied to the outlet.
Lost internet connection. Check internet connection - Network may be
down.
LAN/WEB lights are not on Lost internet connection Check internet connection - Network may be
down.
LAN/WEB lights are on but
there is no (or spotty) Wi-Fi
connection, and/or app
reads "Connection Error"
Control box is too far from home
router
Relocate the control box as near to the home
router as practical. (See: Install and Submerge
the Cleaner) Do not use an extension cord.
Weak Wi-Fi signal Check for adequate Wi-Fi signal strength.
With a Windows laptop, go to Network
Connections in the Control Panel. Check
Signal Strength meter under Wireless
Network Connection icon while standing near
the control box.
With a smart device, search for, download,
and use an app that can check signal
strength while standing near the control box.
If Wi-Fi signal is weak, consider installing a
Wi-Fi extender.
Only one of the LAN/WEB
lights are on
Connectivity issue with local Wi-Fi or
connection to the server.
Contact your local internet service provider.
Unplug your control box and wait 10
seconds. Plug in the box again and see if
lights illuminate.
Check Internet connection - Network may be
down.
LAN/WEB lights are ashing Antenna rmware update in progress. Flashing may continue up to ten minutes until
update is complete.
Page 35
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual

Related product manuals