To Next PageTo Next Page
Need help?Do you have a question about the Zoeller 1043-0006Q and is the answer not in the manual?
General| Model | 1043-0006Q |
|---|---|
| Category | Water Pump |
| Type | Submersible |
| Voltage | 115V |
| Maximum Head | 25 ft |
| Construction | Cast Iron |
| Float Switch Included | Yes |
| Cord Length | 10 ft |
| Horsepower | 0.5 HP |
| Discharge Size | 1-1/2 in |
| Phase | Single-Phase |
Details risks of pumping flammable liquids and using in explosive atmospheres.
Covers safe electrical handling, grounding, GFCI, and avoiding wet conditions.
Addresses thermal overload, pressure relief, voltage compatibility, and water type limits.
Verifying parts, assembly time, and tool requirements before installation.
Step-by-step guide for connecting the pump and placing it in water.
How to start the pump, its auto-shutoff feature, and timer function.
Advice on unplugging when not in use and avoiding partial submersion.
Motor housing is sealed; disassembly voids warranty.
How to inspect inlet, clear clogs, and clean the screen.
Possible causes and corrective actions for no water flow.
Corrective actions for a motor that runs too hot.
Causes and solutions for a reduced water flow rate.
Troubleshooting steps when the pump fails to start.
Details the two-year warranty, what it covers, and what it does not cover.
Procedures for returning parts and limitations on manufacturer liability.
