9650-0308-01 Rev. A ZOLL AED Plus Service Manual 1–1
Chapter 1
Maintenance Tests
This chapter describes the procedures for routine testing of the AED Plus unit.
A test typically consists of multiple steps, each of which requires a pass/fail rating. For each
step, perform the specified action and then verify that the expected results occur. If all expected
results occur, assign a “Pass” rating to the step; otherwise, assign it a “Fail” rating.
This chapter includes the following inspection and test procedures:
• “1.0 Physical Inspection” on page 1-3
• “2.0 Preventive Maintenance Test” on page 1-4
• “3.0 Manual Self-Test” on page 1-9