Need help?Do you have a question about the Zonestar Z6 and is the answer not in the manual?
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 260°C |
| Power Supply | 24V |
| Print Technology | FDM (Fused Deposition Modeling) |
| Supported Materials | PLA, ABS, PETG, TPU |
| Frame Material | Aluminum |
| Display | LCD |
Follow standard procedures, keep away from children, ensure supervision.
Beware of electrical shock and hot components after shutdown.
Ensure ventilation and correct AC power switch setting.
Load filament to both extruders for multi-color prints.
Base, X-axis, Z-axis modules, lead screw, and Z-endstop.
Includes power adapter, cables, tools, and TF card.
Insert the Z-axis module into the carrier of the X-axis module.
Screw the lead screw into the carrier of the X-axis module.
Install coupling onto the motor shaft and tighten set screws.
Fasten the Z-axis module to the base module using screws.
Snap the Z-ENDSTOP into the aluminum profile and tighten screws.
Insert the PTFE tube into the PTFE tube fitting.
Adjust eccentric columns for smooth wheel movement on tracks.
Schematic illustrating electrical connections for the Z6 printer model.
Schematic illustrating electrical connections for the Z6B printer model.
Instructions for using the rotary knob to navigate menus and adjust settings.
Key information displayed on the LCD, including temperatures and print status.
Detailed steps for leveling the hotbed for optimal first layer adhesion.
Adjusting nozzle to bed distance using leveling nuts for paper clearance.
Steps to preheat, load filament, and confirm flow through the extruder.
Using the extruder mechanism and knob to feed filament correctly.
Guide for inserting SD card, selecting, and starting a print job.
Fine-tuning Z offset during printing to ensure filament sticks to the bed.
Specific instructions for dual extruder users to print a test object.
Process of converting 3D models to G-code using slicing software.
List of compatible slicing and host software for the printer.
Link to cloud storage for additional software guides and drivers.
Overview of ZONESTAR's history, product lines, and market presence.
ZONESTAR's commitment to innovation, quality, and customer service.
Links to the official website, YouTube channel, and online store.
To Next Page
