Need help?Do you have a question about the Zonestar Z8XM2 and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 260°C |
| Supported Materials | PLA, ABS, TPU |
| Frame Material | Aluminum |
| Printing Technology | FDM |
| Power Supply | 24V |
To Next Page
