Need help?Do you have a question about the Zonestar Z8X and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Print Speed | 150 mm/s |
| Connectivity | USB, SD card |
| Supported Materials | PLA, ABS, PETG, TPU |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 250°C |
| Display | LCD screen |
| Power Supply | 24V |
Critical instructions and tips for correct assembly and avoiding errors.
Details and dimensions of various aluminum profiles used in the printer assembly.
Identification of metal and acrylic parts, including brackets, shells, and covers.
List and specifications of screws, nuts, and other fasteners included in the kit.
Step-by-step guide to assemble the extruder mechanism (EM4).
Instructions for assembling the hotend module, including fans and shell.
Guide for assembling the Y-axis motor, endstop, and driver mechanism.
Steps for assembling the heat bed bracket and mounting the heat bed.
Assembly of left and right Z-axis driver mechanisms and carriers.
Building the printer's base framework and installing rails for axes.
Mounting the hotend and extruder for single/dual extruder setups.
Steps for installing the LCD screen and connecting the control board.
Instructions for installing the second extruder and its related components.
Final step of installing the cover for the main control board.
Detailed wiring diagrams for Z8X, Z8XR2, Z8XM2 models and power supply connection.
Procedures for changing stepper motor direction and adjusting motor current.
Guide on how to level the heatbed for optimal printing performance.
Information on upgrading the printer with a dual extruder or laser kit.
To Next Page
