Wireless-N USB Adapter
To disconnect from the current network:
1 From the Start menu, select Connect to.
2 In the Disconnect or Connect to another network dialog
box, select the current network and click Disconnect.
3 In the Are You Sure? message box, click Disconnect
again.
4 In the next dialog box, you can connect to another network
or click Close to complete the disconnect procedure.
Connecting your Windows XP Computer to
a Wireless Network
1 Click the Wireless Network Configuration utility icon in
your computer’s system tray.
2 In the Choose a Wireless Network window select the
network where you want to connect and then click Connect
Note: If the Choose a Wireless Network window displays
the message Windows can not configure the wireless
connection. You will need to enable the Windows Zero
Configuration service. Please go to Enabling Windows Zero
Configuration service in Windows XP below to learn how to
enable it.
3 If your wireless network does not use security (not
recommended) click Connect Anyway to connect to your
wireless network. If your wireless network uses security you
will be prompted for a Network key. Enter your wireless
security key in the Network Key and Confirm Network Key
and click Connect.
Your computer is now connected to your wireless Network, and
your USB adapter setup is complete! If you want help with the
Wireless Network Configuration utility, see Windows Help and
Support.
To Next Page
