Zoom 300M Wireless-N - Connecting to a Wireless Network in Mac os X

Installing the Wireless-N USB Adapter in Mac OS X
17
2 In the folder, select the OS X 10.4 folder and double-click to
open.
3 Double click on the Installer.mpkg and then click Continue.
4 Click Continue on the important Information screen.
5 Click Continue on the Software License Agreement Screen.
Then click Agree. If the Software License does not appear
on your screen you can review it Appendix C: Software
License.
6 Click Install. When prompted for your Name and Password,
enter the name and password you use to login to your
computer. Click OK.
7 Click Continue Installation to install the software now.
When the installation is complete click Restart to restart your
computer.
8 Wait until you see the desktop then plug your USB adapter
into one of the available USB slots on your computer.
9 The drivers will install automatically. When prompted to
enable the WLAN card click OK.
10 The System Preferences pane opens. Under Internet &
Network click Network.
11 The New Port Detected box appears, click OK.
12 From the Show drop down menu select Ethernet Adapter
(en x), where x is a number.
13 Click Apply Now. You can now close the Network pane.
Congratulations! Your Wireless-N USB adapter is now installed.
Please continue to Chapter 5: Connecting to a Wireless Network
in Mac OS X to learn how to connect to an existing wireless
network.