Wireless-N USB Adapter
whenever it is available, select the SSID of the wireless
network and click on Add to Profile.
2 If security is enabled on the network: The Wireless Network
Security Properties box appears. Enter your wireless
security key in the Network Key and Confirm Network Key.
If you selected Add to Profile you can give your profile a
name in the Profile Name field. By default it will use the
SSID as the profile name. Click OK to connect to the wireless
network.
If security is disabled on the network: If you clicked Connect
to join the wireless network the adapter will go ahead and
connect to the network. If you clicked Add to Profile the
Wireless Network Security Properties box appears. You
can enter a name for the stored profile in the Profile Name
field. By default it will use the SSID as the profile name. Click
OK to store your profile and connect to the wireless network.
Your computer should now be connected to the wireless
network.
Monitoring Link Status
To monitor the link status of your wireless connection:
1 Double-click on the Wireless-N USB Configuration utility icon
on the Dock. This opens the wireless configuration
utility.
2 Click on the Link Status tab.
The Link Status page will appear:
To Next Page
