Zoom B9.1ut User Manual

11
ZOOM B9.1ut
Quick Guide 1 (Manual Mode/Play Mode Operation)
Selecting patches (play mode)
The B9.1ut is in play mode.
1. Press the [MANUAL] key so that the key is off.
3. To return to manual mode, press the [MANUAL] key
again so that the key is on.
2. To select a patch, use the PATCH/BANK [▼]/[▲] foot
switches to select a group/bank, and then use foot
switches 1 – 4.
Pre-amp operation
The pre-amp section allows
you to adjust distortion
intensity and EQ.
The B9.1ut goes into edit
mode.
1. Turn the knobs of the
pre-amp section to
make adjustments.
2. To return to manual
mode or play mode,
press the [EXIT] key.
Distortion
intensity
Ultra high range boost/cut
Pre-amp module output level
Low range boost/cut
Hi-mid range boost/cut
Very low range boost/cut
Lo-mid range boost/cut
High range boost/cut
[Pre-amp section]
0804B9E.indb110804B9E.indb11 08.4.2510:57:26AM08.4.2510:57:26AM

Zoom B9.1ut Specifications

General

Brand	Zoom
Model	B9.1ut
Category	Computer Hardware
Language	English