Zoom B9.1ut User Manual

<!) +YP]L
i)`WZw)`WZp)`WZ

HINT
You can change the modules assigned to
the foot switches 1 - 4 (→ p. 38).
[Identical display items in manual mode and
play mode]
[Modules assigned to foot switches 1 – 4]
Switching modules on and off with your foot (manual mode)
Patch name
Group name/Bank number/Patch number
Bank number
Patch number
The respective LED for the module assigned
to the foot switch changes status. Module on:
LED on. Module off: LED flashing.
Each push on one of the PATCH/BANK [▼]/[▲] foot
switches changes to the next patch.
Immediately after power-on, the unit will be in manual mode, where you can use
foot switches 1 – 4 to switch modules on and off.
1. Use the PATCH/BANK [▼]/[▲] foot switches to select a patch.
2. Press the foot switch for the module
to be switched on and off.
COMP or WAH/EFX1 module
PRE-AMP or EXT LOOP module
LED for controlled module is on or flashing
MOD-EFX2 or EQ module
DELAY or REVERB module
10
ZOOM B9.1ut
Quick Guide 1 (Manual Mode/Play Mode Operation)
This section explains various basic steps, allowing you to use the B9.1ut right away.
0804B9E.indb100804B9E.indb10 08.4.2510:57:23AM08.4.2510:57:23AM

Zoom B9.1ut Specifications

General

Brand	Zoom
Model	B9.1ut
Category	Computer Hardware
Language	English