Zoom F4 - Page 16

Functions added in Version 3.0
Setting signals sent to the output jacks (Routing)
16
Setting signals sent to the output jacks (Routing) (continued)
NOTE
• Tracks 1–6 can be set to Prefader or Postfader.
• L/R tracks and tracks U1-U4 can only be set to Postfader.
• The 1-6, L/R and U1-U4 tracks cannot be selected at the
same time. Selecting one type will deselect the other.
6. Press m.
Setting signals sent to the SUB OUT
4. Use e to select SUB OUT
Routing, and press E.
5. Use e to select the track for SUB OUT 1 or SUB
OUT 2 routing and press E.
Tracks routed to SUB OUT 1
Tracks routed to SUB OUT 2
Press again to set tracks 1–6 to prefader
Press to cycle through settings
• Change tracks 1–6 to postfader (cancel others)
• Change L/R tracks to postfader (cancel others)
• Chamge track U1-U4 to postfader (cancel other) (cancel MS)
Prefader selected
Postfader selected
Off
Clear all settings
HINT
Press
E
to cycle through the options:
Prefader → Postfader → Off.