Zoom F4 - Page 15

F
Multi Track Field Recorder
Functions added in Version 3.0
Setting signals sent to the output jacks (Routing)
15
Setting signals sent to the output jacks (Routing) (continued)
Setting signals sent to the MAIN OUT
4. Use e to select MAIN OUT
Routing, and press E.
5. Use e to select the track for MAIN OUT 1 or MAIN
OUT 2 routing and press E.
Tracks routed to MAIN OUT 1
Tracks routed to MAIN OUT 2
Press to set tracks 1–6 to prefader
Press to cycle through settings
• Change tracks 1–6 to postfader (cancel others)
• Change L/R tracks to postfader (cancel others)
• Chamge track U1-U4 to postfader (cancel other) (cancel MS)
Prefader selected
Postfader selected
Off
Clear all settings
HINT
Press
E
to cycle through the options:
Prefader → Postfader → Off.
NOTE
• Tracks 1–6 can be set to Prefader or Postfader.
• L/R tracks and tracks U1-U4 can only be set to Postfader.
• The 1-6, L/R and U1-U4 tracks cannot be selected at the
same time. Selecting one type will deselect the other.
6. Press m.