2
Inserting SD cards
• Supported recording media:
SDHC, SDXC cards
• To remove an SD card, push it further into the
slot and then pull it out.
• Always turn the power off before inserting or
removing an SD card.
Preparing power sources
■
Using AA batteries
• Use only one type of battery (alkaline, NiMH
or lithium) at a time.
• Set the type of battery used correctly so that
the amount of remaining battery charge can
be shown accurately.
MENU>SYSTEM>Power Source
Battery Type
After loading the batteries, close the
battery cover and tighten the screw.
To Next Page
Loading...
