Updating the rmware
Check the ZOOM website (https://www.zoom.co.jp/), and download rmware for the .
1.
While pressing both and , use a USB cable to connect the and the
computer.
This turns the power on and opens the FIRMWARE UPDATE screen.
2.
Launch the rmware update application on the computer.
This will start the update.
"Complete!" will appear when updating nishes.
NOTE
• Do not disconnect the USB cable during a rmware update.
• In the unlikely event that a rmware update should fail while in progress, conduct the procedures from
the beginning to update the rmware again.
HINT
See the ZOOM website for details about using the application.
3.
After updating completes, disconnect the USB cable and turn the power off.
HINT
Updating the rmware will not erase saved patches.
57
To Next Page
Loading...
Need help?
General
