ZOOM G2.1u
16
Storing/Copying Patches
An edited patch can be stored in a bank of the user area (A – d). It is also possible to store an existing patch
in another location to create a copy.
A 0
D 0
NOTE
NOTE
In play mode or edit
mode, press the [STORE]
key.
The bank and patch number are shown
on the display as a flashing indication.
Patches of banks in the preset area (0 –
3) are read-only. No patches can be
stored or copied into these locations. If
you press the [STORE] key while a patch
from the preset area is selected, the
patch "A0" (bank A, patch number 0) will
be selected automatically as default
store/copy target.
Select the store/copy
target bank
To select the store/copy target bank,
use the BANK [-]/[+] keys.
Only a bank of the user area (A – d) can
be selected as store/copy target bank.
Storing/Copying Patches
ZOOM G2.1u
17
D 4
D
4
To cancel the store process
To cancel the store process, operate the
Module selector before pressing the [STORE]
key again ( ).
Press the [STORE]
key once more
When the store/copy process is
completed, the G2.1u returns to
the previous mode, with the target
patch being selected.
Specify the store/copy target
patch number
To specify the store/copy target patch number, use
the [W]/[Q] foot switches.
To Next Page
Loading...
Need help?
General
