Prepare
Power / Disabling buttons / Setting the date and time / Reducing noise
2
Prepare
Setting the date and time
Set the date and time on the unit.
1.
While pressing , turn the
power on.
2.
Use and to set the
value, and press
to move
to the next item.
• Press
to return to the
previous item.
3.
After setting the last item
(seconds), press
sound of wind and other noise can be reduced.
•
Slide the LO CUT switch to
ON. The LO CUT icon appears
on the
screen.
Prepare
Reducing noise
↓
1
2,3
2
2
1,2
MEMO
If the date/time setting is initialized,
this screen opens automatically.
To Next Page
Loading...
