Zoom H1 - Adjusting input and output levels

3
Prepare
Adjusting the input level
Adjust the level of the input signal. The unit can also be set to
automatic adjustment.
•
Use the +/– INPUT LEVEL buttons
to adjust the level. For automatic
adjustment, set the AUTO level
switch to ON.
• During adjustment, the
value is shown on the
screen.
Adjust the output level (volume) from the line/headphones
output jack and built-in speaker.
•
Use the +/– VOLUME
buttons to adjust the
level.
• Press and hold the + or –
button to change the value
rapidly.
Prepare
Adjusting the output level
MEMO
When the AUTO level switch is ON, the input
level adjustment buttons have no effect.
If the PEAK/REC LED blinks rapidly, the
sound might be distorted. In this case, lower
the input level.