Need help?Do you have a question about the Zoom MRT-3 and is the answer not in the manual?
Describes warning symbols and general safety advice.
Details power consumption, adapter, and battery operation.
Specifies suitable operating environments.
Covers physical handling, connections, alterations, and troubleshooting steps.
Includes electrical interference and cleaning advice.
Highlights the MRT-3's capabilities and design advantages.
Identifies controls on the device's top surface.
Details the ports and switches on the back panel.
Shows setup for headphones, monitors, and MIDI devices.
Guides on system connection and volume levels.
Instructions for inserting and using batteries.
Explains patterns, their organization, and song structure.
Explains kits, pads, and bank switching.
Steps to activate and listen to the built-in demo song.
How to hit pads, hear sounds, and switch pad banks.
Steps to choose a kit using value keys.
How to select, play, and switch pattern banks.
How to start, stop, and change pattern tempo.
Procedure for recording patterns and setting timing.
Details on quantize values and starting real-time recording.
Tapping pads to record and how to pause.
How to remove specific sounds from a pattern.
Method for entering notes and rests step-by-step.
Detailed steps for step recording.
How to remove recorded notes.
Adjusting timing resolution and number of measures.
Adjusting the time signature of patterns.
Procedure for copying patterns to other slots.
How to delete a specific pattern from memory.
How to clear all user patterns at once.
How to modify kit sound parameters for each pad.
Adjusting individual pad and overall kit parameters.
Explains sound selection, pitch, and panning.
Explains sound level and pad sensitivity settings.
Procedure to copy kits to user slots.
Explains song structure, steps, and parameters.
Steps to add patterns to a song sequence.
Building songs and editing steps.
How to listen to, pause, and stop songs.
Adjusting tempo for specific song steps.
Adjusting volume for specific song steps.
Assigning a single kit for the entire song.
Monitoring memory and duplicating songs.
How to remove a specific song from memory.
How to clear all stored songs at once.
Using the FS01 for various controls.
Explains specific operations assigned to the foot switch.
Connecting to MIDI sequencers/recorders.
Explains Internal, MIDI Clock, and Remote modes.
Details on how MIDI sync works with different modes.
Using MIDI keyboard to trigger MRT-3 sounds.
Setting the MIDI channel for sound reception.
Adjusting rhythmic swing for patterns and songs.
Configuring the recording countdown measures.
Instructions for resetting the unit.
Diagnosing no sound or low volume problems.
Troubleshooting pattern/song recording and stereo playback.
Diagnosing problems with the FS01.
Lists detailed technical parameters of the MRT-3.
A table of available kits with MIDI program change numbers.
Maps MIDI note numbers to specific instrument sounds.
A categorized list of all available instrument sounds.
A comprehensive list of all patterns and their assigned kits.
Details MIDI messages the MRT-3 understands.
Summary of MRT-3's MIDI capabilities and supported messages.
To Next Page
General
