Zoom MRT-3 - MIDI Recognized Messages

MIDI Implementation
1. Recognized Messages
Status 1st 2nd Description
-----------------------------------------------------------------------------------
8nH kk vv Note Off kk: note number (See Note 1)
vv: velocity will be ignored
9nH kk 00H Note Off kk: note number (See Note 1)
9nH kk vv Note On kk: note number
vv: velocity
BnH 07H vv Channel Volume vv: volume value
BnH 11H vv Channel Expression vv: expression value
BnH 78H xx All Sounds Off
BnH 7BH xx All Notes Off
CnH pp Program Change pp: program number (See Note 2)
F2H sl sh Song Position Pointer shsl: song position (See Note 3)
F3H ss Song Select ss: song number 0-98
F8H Timing Clock
FAH Start
FBH Continue
FCH Stop
NOTE: n = MIDI Channel Number ( 0000 - 1111 )
1. Note Off Messages is recognized but will be ignored.
2. Relationship between Program Numbers and Kit Numbers are assigned as
"Kits List" attached.
3. SongPositionPointer for a pattern, new location is wrapped around
the bar length of the pattern.
4. Note On messages can be recorded into a pattern.
2. Transmitted Messages
NONE.
3. System Exclusive Messages
No SysEx messages are recognized/transmitted.
ZOOM MRT-3
60
Reference