Recording Song Patterns
This section describes how you can collect a number of patterns into a song.
1.
Press the [SONG] key.
The MRT-3 goes into song mode, and the [SONG] key lights up. The display shows the
currently selected song number.
2.
Use the [VALUE +/-] keys to select an empty song number.
When you select an empty song, the indication "E" appears on the right side of the display.
3.
Press the [REC] key.
The [REC] key lights up, indicating that the MRT-3 is ready for song recording. The last
two digits of the display show the step number.
4.
Use the [VALUE +/-] keys to select the user pattern number to be assigned to the
first step.
When you press a [VALUE +/-] key, the [PATTERN] key flashes and the display shows the
pattern bank and number.
•You can also directly switch the pattern bank by pressing the [FUNCTION] key and then the
[VALUE +/-] key.
•You can listen to the currently selected pattern by pressing the [PLAY] key.
To Next Page
Loading...
