What to do if playback sound is distorted on Zoom Drums?
If the sound from your Zoom Drums is distorted or breaking up, try adjusting the [OUTPUT] knob on the ST-224 to a suitable position. Also, adjust the [INPUT] knob on the ST-224 to a suitable position and repeat the sampling process.
How to fix no sound on Zoom Drums?
If you're experiencing no sound or very low volume with your Zoom Drums, ensure that you have correct connections. You can also try changing to another shielded cable. Make sure that you establish appropriate settings and select an appropriate pad or song. Also, set the LEVEL pad parameter to an appropriate value.
What to do if song cannot be recorded on Zoom Drums?
If you are unable to record a song on your Zoom Drums, first, press the [EXIT] key to terminate other modes. Then, use the [SONG FUNCTION] key and pad 8 to set the MIDI parameter from "Midi" (receive MIDI messages) to "Int" (do not receive MIDI messages).
What to do if sound is heard when hitting pads, but MIDI play does not work on Zoom Drums?
If you hear sound when hitting the pads on your Zoom Drums, but MIDI play isn't working, match the ST-224 MIDI receive channel to the send channel of the MIDI device.
How to turn off the sound of [SOURCE] input on Zoom Drums?
To turn off the sound of the [SOURCE] input on your Zoom Drums, use the [PAD FUNCTION] key and [SOURCE] pad to change the setting of the SOURCE MIX parameter from "on" (input source is constantly supplied to output) to "oFF" (input source is only supplied to output when [SOURCE] pad is pressed).
General| Number of Tracks | 8 |
|---|---|
| Sampling Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| Polyphony | 8 voices |
| Power | 9V DC adapter or 6 x AA batteries |
| Sample Resolution | 16-bit |
| Number of Pads | 16 |
| Sequencer | Yes |
| Connectivity | MIDI In/Out |
| Outputs | 1 x 1/4" Headphone Output |
| Inputs | Mic/Line In |
| Type | Sampling Drum Machine |
Guidance on using the correct AC adapter and handling voltage differences.
Recommendations for avoiding extreme temperatures, humidity, dust, and vibration.
Instructions for careful handling to prevent damage from pressure, shock, or drops.
Warning against modifications and procedure for connecting/disconnecting cables.
Advice on minimizing electromagnetic interference and its potential effects.
Instructions for cleaning the unit using a soft, dry cloth, avoiding solvents.
Summary of sampler settings, pad play, sequencer, effects, and auto sync functions.
Identification of effect, sampling, input/output, and pad sections and their controls.
Details on display, BPM, playlist, backup, and sequencer controls.
Overview of rear panel jacks like DC IN, MIDI IN, DATA CARD, PHONES, OUTPUT.
Guide to connecting headphones, playback equipment, and MIDI devices.
Instructions for connecting CD players for sampling stereo or mono sources.
Instructions for connecting a microphone for sampling, setting LINE/MIC switch.
Steps to adjust volume levels for the ST-224 and playback equipment.
How to play the built-in demo song and stop it.
How to play factory-preset sounds assigned to pads and switch banks.
Steps to select an effect type and apply it to a specific pad.
Procedure for sampling sounds from an external source using the RECORD key.
Explanation of the ST-224's main sections: Sampler, Sequencer, and Effects.
Definition of a sample and information on main memory storage capacity.
Explanation of how pads 1-8 are grouped into three banks for 24 total pads.
Details on Main Memory, Backup Memory, and Data Card (SM04) memory types.
Explanation of BPM and the three types: Song BPM, Pad BPM, and Effect BPM.
Procedure for manually specifying start and end points for sampling.
Introduction to auto recording and auto stop modes for automatic sampling.
How to select banks and play samples using one-shot or loop playback.
Using the SOURCE pad to switch external input signals on/off like a DJ.
Steps to select a sample from main memory and assign it to a pad.
Assigning one sample to pads 1-8 with automatic pitch changes via a Major scale.
Setting start point, end point, and offset for sample playback.
How to select and edit parameters like level, tuning, and panning for each pad.
Detailed explanation of parameters for pads 1-8 and SOURCE pad.
How to copy pad settings from one pad to another.
Procedure to erase pad settings and revert to the original unassigned condition.
How to delete specific samples or all samples from main memory.
Erasing unassigned or unused sample portions to free up memory.
How to match pad tempos using the Auto Sync function.
Manually setting the BPM for a pad before using Auto Sync.
Steps to select, apply, and enable effects for pads.
How to synchronize effect parameters to a specific BPM tempo.
List of 22 effect types and their adjustable parameters via EDIT 1/2.
Procedure for recording pad actions as a song with quantize and BPM settings.
How to play recorded songs, loop playback, and change start position.
Adjusting song length, beats, metronome volume, pre-count, etc.
Detailed explanation of parameters for bar length, quantize, time sig, shift, etc.
How to copy song data to another song for version creation.
Procedure to delete songs and return them to a blank condition.
How to assign songs 1-8 to pads 1-8 for playlist playback.
How to create new samples from pad play or song playback for resampling.
How to save and load all main memory data to/from backup memory.
Procedure for formatting a data card for use with the ST-224.
How to save main memory data to a data card.
How to load bulk data from a data card into main memory.
Loading specific pad data or WAV/AIFF files from card/backup.
Guide to connecting external equipment via MIDI OUT to the ST-224 MIDI IN jack.
Controlling ST-224 pads with an external MIDI sequencer or controller.
Synchronizing ST-224 song playback with an external MIDI sequencer.
Steps to reset the unit to factory default settings, erasing all data.
Skip backup loading for faster startup, resulting in empty main memory.
Checks and remedies for no or low audio output from the unit.
Troubleshooting steps for distorted or choppy sound during playback.
Solutions for issues preventing sampling or causing errors.
Resolving problems with SOURCE pad input and effects not working.
Fixes for songs not recording and MIDI playback not functioning.
Details on A/D converter, D/A converter, and ZOOM original ZFX-2 DSP.
Sampling frequency, recording times, tempo, and number of effects.
Details on controls, display, inputs (LINE/MIC), and outputs (LINE/PHONES).
Information on memory, power requirements, dimensions, weight, and accessories.
Details on importing WAV files: format, sampling frequency, quantization, naming.
Details on importing AIFF files: format, parameters, and naming conventions.
Description of MIDI channel voice messages: Note Off, Note On, Pressure, Control Change.
Mapping of note numbers to pads, and control change assignments for functions.
List of effect types and their banks (A/B).
MIDI messages for various modes and system commands.
Overview of MIDI functions: Channel, Note, Control Change, Program Change.
Indicates which MIDI functions are transmitted and recognized by the ST-224.
Additional notes and channel information for MIDI implementation.
To Next Page
