Zoom Sampletrak ST-224 - Usage Precautions; Electrical Interference; Cleaning Instructions

Usage Precautions
•Electrical interference
For safety considerations, the SampleTrak ST-224 has been designed to provide maximum protection
against the emission of electromagnetic radiation from inside the device, and protection from external
interference. However, equipment that is very susceptible to interference or that emits powerful
electromagnetic waves should not be placed near the SampleTrak ST-224, as the possibility of
interference cannot be ruled out entirely.
With any type of digital control device, the SampleTrak ST-224 included, electromagnetic interference
can cause malfunctioning and can corrupt or destroy data. Care should be taken to minimize the risk of
damage.
•Cleaning
Use a soft, dry cloth to clean the SampleTrak ST-224. If necessary, slightly moisten the cloth. Do not
use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull
the finish or damage the surface.
Please keep this manual in a convenient place for future reference.
3
USAGE AND SAFETY PRECAUTIONS