4.
Hold down the [TEMPO] key.
While the [TEMPO] key is being pressed, the tempo change information for that step is
shown on the display. If no tempo change information is stored for that step, the indication
is "---".
5.
While holding down the [TEMPO] key, use the [VALUE +/-] keys to set the tempo
value (40 – 250).
6.
If desired, set the tempo for other song steps as well by repeating steps 3 – 5.
7.
When you have completed the tempo change input, press the [STOP] key.
Changing the Song Volume
This section describes how you can change the pattern volume within a song that has already been
recorded.
1.
In song mode, select the song whose volume you want to alter.
2.
Press the [REC] key.
The [REC] key lights up, and the song can be edited.
3.
Hold down the [SONG] key while pressing the [VALUE +/-] keys to select the step
you want to edit.
The last two digits of the display show the step number.
To Next Page
Loading...
