6 7
Effect Types and Parameters
[ DRIVE ]
ZEN O.DRIVE This models the sound of a Hermida Audio Zendrive.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
VOICE Adjusts gain of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
DYNAMIC
DRIVE
This effect easily achieves the warm drive tone of a tube amp.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
MODE Sets the sound style.
COMBO,
STACK
VOL Adjusts the volume. 0 – 100
PLUS
DISTORTION
This models the sound of a MXR DISTORTION+.
GAIN Adjusts the gain. 0 – 100
VOL Adjusts the volume. 0 – 100
DRYMX Adjusts the volume of the unaffected sound. 0 – 100
COMP Sets the clipping type of DIST Plus.
ORIGINAL,
MODIFY1,
MODIFY2
DISTORTION
ONE
This models the sound of a BOSS DS-1 DISTORTION.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
COMP Sets the clipping type of DIST 1.
ORIGINAL,
MODIFY
SQUEAK
DISTORTION
This models a ProCo RAT.
A parameter has been added that allows you to adjust the mix level of the original sound.
GAIN Adjusts the gain. 0 – 100
FLTR Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
DRYMX Adjusts the volume of the unaffected sound. 0 – 100
RED CRUNCH
DRIVE
Use this effect for the famous "brown sound."
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
PRESENC Adjusts volume of super-high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
VIOLET
DISTORTION
This models the sound of a SUHR Riot Reloaded.
GAIN Adjusts the gain. 0 – 100
TONE Adjusts the tone. 0 – 100
VOICE Sets the sound style. 0 – 2
VOL Adjusts the volume. 0 – 100
To Next Page
Loading...
