16 17
Effect Types and Parameters
[ DELAY ]
FILTER DELAY This effect filters a delayed sound.
TIME Sets the delay time. 1 - 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
PITCH DELAY This effect applies pitch shift to a delayed sound.
PITCH Sets volume of pitch shift applied to delayed sound. -12 - 12
TIME Sets the delay time. 1 - 2000
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
HOLD DELAY
This hold delay effect is controlled using the foot switch. When you press the foot switch,
the effect turns on, and when you release it, the effect sound is held.
TIME Sets the delay time. 1 - 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 - 100
HI-DMP Adjusts the treble attenuation of the delay sound. 0 - 10
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
P-P Sets delay output to mono or Ping Pong. MONO, P-P
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
To Next Page
Loading...
