16 17
Effect Types and Parameters
[ DELAY ]
DUAL DELAY This effect combines 2 delays and is based on the Eventide TimeFactor DigitalDelay.
TIMEA Adjusts the delay time of Delay A. 0 – 1490
TIMEB Adjusts the delay time of Delay B. 0 – 1490
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
BAL Adjusts the balance between original and effect sounds. 0 – 100
REP A Adjusts the number of Delay A repeats. 0 – 110
REP B Adjusts the number of Delay B repeats. 0 – 110
DLYMX Adjust the mix of the Delay A and B effect sounds. 0 – 100
DEPTH Sets the depth of the modulation. Also sets the output to mono (M0.M50) or stereo (S0.S50). MN-0 – ST-50
SOFT ECHO This echo has a soft tone.This echo effect allows the use of modulation.
MOD Turns modulation ON or OFF. OFF, ON
TIME Sets the delay time. 19 – 581
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
SLAPBACK
DELAY
This delay features a short delay time that is good for muted rhythm playing and
rockabilly.
TIME
Sets the delay time.
When Sync is chosen, the delay time is synchronized to the tempo.
1 - 300, SYNC
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
SUBDV
Set the note length of the delay sound.
When P-P is chosen, L/R channels output delays in quarter/dotted eighth notes respectively.
♩
,
♪
. , P-P
PING-PONG
DELAY
This delay outputs the delay sound alternately left and right.
TIME Sets the delay time. 1 – 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
REVERSE
DELAY
This reverse delay is a long delay with a maximum length of 2000 ms.
TIME Sets the delay time. 10 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 - 100
BAL Adjusts the balance between original and effect sounds. 0 - 100
MODULATION
DELAY
This delay effect allows the use of modulation.
TIME Sets the delay time. 1 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
To Next Page
Loading...
