Zoom MULTISTOMP MS-50G+ - Connecting the Device; Guitar and Amp Connections; Power Connections: AC Adapter and USB

14 15
Effect Types and Parameters
[ MODULATION ]
RING
MODULATOR
This effect produces a metallic ringing sound. Adjusting the "FREQ" parameter results in a
drastic change of sound character.
FREQ Sets the frequency of the modulation. 1 – 50
TONE Adjusts the tone. 0 – 10
BAL Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
SLICER This effect creates a rhythmical sound by continuously slicing the input.
PTTRN Sets effect pattern. 1 – 20
SPEED Sets the speed of the modulation. 1 – 50
THRSH Adjusts effect threshold. 0 – 50
VOL Adjusts the volume. 0 – 100
[ DELAY ]
DELAY This long delay has a maximum length of 4000 ms.
TIME Sets the delay time. 1 – 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
ANALOG
DELAY
This analog delay simulation has a long delay with a maximum length of 4000 ms.
TIME Sets the delay time. 1 – 4000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
TAPE ECHO
This effect simulates a tape echo. Changing the "Time" parameter changes the pitch of the
echoes.
TIME Sets the delay time. 1 – 2000
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
TAPE ECHO 3 This tape echo effect models the MAESTRO ECHOPLEX EP-3.
TIME Sets the delay time. 10 – 2900
MODE
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
SHORT,
LONG,
REPEAT Adjusts the number of repeats. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
GAIN Adjusts the gain. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
LO Adjusts volume of low frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
DELAY