Zoom MULTISTOMP MS-50G+ - Page 14

14 15
Effect Types and Parameters
[ MODULATION ]
VIBRATO This effect automatically adds vibrato.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 0 - 50
TONE Adjusts the tone. 0 - 10
BAL Adjusts the balance between original and effect sounds. 0 - 100
SWELL
VIBRATO
This effect modulates the pitch after picking.
DEPTH Sets the depth of the modulation. 0 – 100
SPEED Sets the speed of the modulation. 0 – 100
RISE Sets the time before the effect begins to modulate the pitch. 0 – 100
VOL Adjusts the output level. 0 – 100
OCTAVER This effect adds sound one octave and two octaves below the original sound.
OCT1 Adjusts the level of the sound one octave below the effect sound. 0 – 100
OCT2 Adjusts the level of the sound two octaves below the effect sound. 0 – 100
TONE Adjusts the tone. 0 – 10
DRY Adjusts the volume of the unaffected sound. 0 – 100
POLYPHONIC
OCTAVER
This octaver supports chord playing.
LO Adjusts volume of low frequencies. 0 - 100
HI Adjusts volume of high frequencies. 0 - 100
WET Adjust the amount of the effect sound in the mix. 0 - 100
DRY Adjust the amount of the original sound in the mix. 0 - 100
HARMONY
PITCH
SHIFTER
This intelligent pitch shifter outputs the effect sound with the pitch shifted according to
scale and key settings.
SCALE Sets the pitch of the pitch-shifted sound added to the original sound.
-6, -5, -4, -3, -m,
m, 3, 4, 5, 6
( See Table 1 )
KEY Sets the tonic (root) of the scale used for pitch shifting.
C, C#, D, D#, E,
F, F#, G, G#, A,
A#, B
TONE Adjusts the tone. 0 – 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
POLYPHONIC
PITCH
SHIFTER
This pitch shifter supports chord playing.
SHIFT Adjusts the pitch shift amount in semitones. -24 – 24
TONE Adjusts the tone. 0 – 100
WET Adjust the amount of the effect sound in the mix. 0 – 100
DRY Adjust the amount of the original sound in the mix. 0 – 100
GEMINOS
DOUBLER
This effect allows you to obtain double tracking in real time.
TIGHT Adjusts the tightness of the double tracking. 0 – 100
MODE Select Stereo / Mono and select the number of tracks.
MN-3, MN-2,
MN-1, ST-1,
ST-2, ST-3
WET Adjust the amount of the effect sound in the mix. 0 – 100
DRY Adjust the amount of the original sound in the mix. 0 – 100