12 13
Effect Types and Parameters
[ MODULATION ]
ORANGE
TREMOLO
This effect varies the volume at a regular rate.
WAVE Sets the modulation waveform.
TRI, TUBE,
SQR
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 100
VOL Adjusts the volume. 0 – 100
PHASER This effect adds a phasing variation to the sound.
COLOR Sets the tone of the effect type.
4 STG,
8 STG,
INV 4,
INV 8
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 1 – 50
RESO Sets effect resonance. 0 – 100
STONE
PHASER
This phaser sound models the Electro-Harmonix SmallStone.
COLOR Sets the sound color. 1, 2
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 100
RESO Sets effect resonance. 0 – 100
WARP
PHASER
This phaser has a one way effect.
MODE Sets direction of warping. GO, BACK
SPEED Sets modulation speed. 1 - 50
RESO Sets effect resonance. 0 - 10
VOL Adjusts the volume. 0 - 100
THE VIBE This vibe sound features unique undulations.
SPEED Sets the speed of the modulation. 0 – 50
DEPTH Sets the depth of the modulation. 0 – 100
MODE Sets effect to vibrato or chorus.
VIBRT,
CHORS
VOL Adjusts the volume. 0 – 100
VINTAGE
FLANGER
This analog flanger sound is similar to an MXR M-117R.
PRE DLY Sets pre-delay time of effect sound. 0 – 50
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 50
RESO Sets effect resonance. -10 – 10
KICK
FLANGER
This flanger is controlled using the foot switch.
PRE DLY Sets pre-delay time of effect sound. 0 - 100
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets the speed of the modulation. 0 - 100
RESO Sets effect resonance. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
RESET-F Adjusts the LFO reset frequency. 0 - 100
ON/OFF
Sets the foot switch function.
LATCH
UNLATCH
To Next Page
Loading...
