Zoom MULTISTOMP MS-50G+ - Menu Screen Navigation

12 13
Effect Types and Parameters
[ PREAMP ]
POLLEX
DRIVE
With extreme drop-tuning, this amp delivers a heavy-metal Djent style of sound.
Recommended for slap-playing as well.
GAIN Adjusts the gain. 0 - 100
VOL Adjusts the volume. 0 - 100
BASS Adjusts volume of low frequencies. 0 - 100
MID Adjusts volume of middle frequencies. 0 - 100
TREBLE Adjusts volume of high frequencies. 0 - 100
PRESENCE Adjusts volume of super-high frequencies. 0 - 100
[ MODULATION ]
CLONE
CHORUS
This analog chorus sound models the Electro-Harmonix SmallClone.
DEPTH Sets the depth of the modulation. 1, 2
RATE Sets the speed of the modulation. 0 – 100
TONE Adjusts the tone. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
CHORUS ONE This models the sound of a BOSS CH-1 SUPER CHORUS.
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 100
TONE Adjusts the tone. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
TRI CHORUS This is a model of tc electronic's CORONA Tri-Chorus.
DEPTH Sets the depth of the modulation. 0 – 100
SPEED Sets the speed of the modulation. 0 – 100
TONE Adjusts the tone. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
ANALOG
CHORUS
This effect simulates an analog chorus.
DEPTH Sets the depth of the modulation. 0 - 100
RATE Sets modulation speed. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
STEREO
CHORUS
This is a stereo chorus with a clear tone.
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 1 – 50
TONE Adjusts the tone. 0 – 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
DETUNE
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
type has a chorus effect without much sense of modulation.
CENT Adjusts the detuning in cents, which are fine increments of 1/100-semitone. -25 – 25
PRE DLY Sets the pre-delay time of the effect sound. 0 – 50
TONE Adjusts the tone. 0 – 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100