Zotac 880G-ITX wifi User Manual

19
Jumper Settings
This chapter explains how to congure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this
chapter whenever in doubt.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen
even if the frequency multiplier setting in CMOS setup is changed.
JP1-Clear CMOS
JP1 Selection
1-2* Normal*
2-3 Clear CMOS
1
1
If you want to clear the system conguration, use the JP1 (Clear CMOS Jumper) to
clear data.
Close Open * = Default setting.
Hardware Installation

Zotac 880G-ITX wifi Specifications

General

Brand	Zotac
Model	880G-ITX wifi
Category	Motherboard
Language	English