ZOTAC ZBOX
22
Attaching your ZOTAC ZBOX to a monitor
You can also attach your ZOTAC ZBOX to the back of a monitor. To do so:
1. Secure the VESA mount to your monitor with four screws (HNM/M4x8).
2. Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and snap the
ZBOX into place on the mount.
To fasten the VESA mount, your monitor must comply with VESA75 Or VESA100
standard.
Mechanical Loading Stability - Please ensure the monitor rests on a stable platform before
attaching ZOTAC ZBOX to prevent damage or injuries from a fall or drop.
If the total weight of your monitor and ZOTAC ZBOX is over 7kg, the system may be unstable.