Zte Altair 2 - Call Settings; Connection Settings

43SETTINGS
On: The call recipient will see your phone number.
Off: The call recipient will not see your phone number.
Auto Redial: Sets the phone to repeatedly redial, in the event of a busy signal,
until it successfully makes a connection.
Call Forwarding: Allows you to reroute your incoming calls to another phone
number. Contact your service provider for more information and availability.
Call Waiting: If a call comes in when you are already on a call, you will be
notied with a call waiting tone. The phone will display the caller’s phone
number. If the caller is in your Address Book, their name will display also.
Contact your service provider for more information and availability.
Call Barring: Block incoming and outgoing calls and change your network
password.
Connection settings
From the home screen, go to the Main menu > Settings > Connection
Settings. You can congure the following options:
Bluetooth: Congure Bluetooth settings. See the Bluetooth section in this
manual for details.
Access Point: Add to, edit, or view the Access Point list.
Internet Proles: Create or edit the connection data for a service provider.
PC Connection: Choose whether to connect your phone to a computer via
USB or Bluetooth.
GPS: Turn on/off your GPS status, or enable the Third-party GPS option.
42 SETTINGS
• Alert Type: Set the ring type (e.g. ring, vibrate and ring).
• Receiver Volume: Set the volume of the receiver.
• Message Tone: Set the notication ringtone for an incoming SMS or
MMS message.
• Key Tone: Enable or disable keypad tones when dialing.
• Warning Tone: Turn the warning tone on or off.
• Power On/Off Tone: Turn on/off the sound that plays while powering on/
off the phone.
• Missed Calls Alert: Enable, disable, and set timing for the missed calls
audible notication.
Call settings
From the home screen, go to the Main menu > Settings > Call Settings.
Earphone Auto Answer: You can congure the phone to answer incoming
calls automatically when an earphone is connected to the phone.
Any Key to Mute: This option allows you to silence the ringtone by pressing
any key when there is an incoming call.
Connection Reminder: When a call connects, you will hear a three-tone
beep to notify you that the connection was successful.
Minute Reminder: When this setting is enabled, you will hear a short beep
every minute while a call is in progress. You will hear the rst beep after 50
seconds, then 1 minute 50 seconds, etc.
Send My Caller ID: This function allows you to prevent others from seeing your
phone number when making outbound calls.
Set by Network: The network chooses whether to show/hide your
phone number.